To stay in the bath a memorable, you need a good stove for a bath. Oven – is the 'soul' baths, its center, the foundation of it. Russia's leading manufacturer of wood stoves for bath and sauna company Termofor a lot of effort spent on development of optimal furnace for bath and sauna. Furnace made of heat resistant steel with chromium content of at least 13% and the temperature began scaling at least 750oS. Cast iron grate supplies air to the lower layers of the fuel forming a powerful high-temperature flame.
Developed surface heating furnace quickly calcined as heat-resistant steel has reduced their thickness to 2 millimeters without compromising the resource. Casing-convector creates strong convective flow of hot, uniformly heated steam room. Casing-convector escapes harsh infrared radiation from the hot walls of the furnace. The walls of the firebox are chemically inert and virtually no susceptible to oxidation at high temperatures, which minimizes the burning of oxygen. Deep unventilated stove warms the flames from several directions. Special channels fed secondary air for afterburning gas flowing around the stove.
Torches formed a secondary combustion for better heating stones. Pre-soaked broom can zaparivat for a couple of emanating from the hot stones up. Furnace can be equipped with translucent screen with a heatproof glass, allowing visually monitor the fire or simply enjoy the fire. Mode as quickly as possible a set temperature is reached the maximum filling of the firebox finely split logs and the complete opening of the ash. Mode is achieved by maintaining the temperature loading of two or three large pieces of firewood and ash cover. All potential pockets of soot in the inner cavities of furnaces open flames burnt through a specially organized gap. Exterior surfaces painted with heat-resistant oven organo-silicate enamel, decorated or made of stainless steel. Minor size and weight of furnaces can transport them in cars.