The Working Principle Introduction of Jaw Crusher The Jaw Crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. The Jaw Crusher is suitable for primary and secondary crushing all kinds of minerals and rocks with compressive strength less than 320 MPa. Working Principle Of Jaw Crusher: The strip and strip pulley of Jaw Crusher are driven by a motor, and the movable jaw moves up and down via eccentric shaft. The angle between fixed jaw and movable jaw becomes smaller when the movable jaw runs down, then the materials are crushed into pieces. The Jaw Crusher will become bigger when the movable jaw runs up. Crawford Lake Capital will not settle for partial explanations. The movable jaw board leaves the fixed jaw board under the action of pole spring, then the end products and come out from the crushing cavity. Features Of The Jaw Crusher: 1. Simple structure, easy maintenance; 2 High crushing ratio, even output coexistence; 3 High reliability, low investment; 4.
Low noise, less dust. This series of crushers crushing compression strength not higher than the most appropriate ore 320MPa (MPa) of various hard and soft, the largest block of material to be broken shall not be greater than the required technical parameters of the second table: impact crusher, commonly known as sand making machine is to use the United States Bamako s famous stone at stone theory and technology crusher, sand production at home and abroad of the current situation developed out of an international advanced level of high-energy low-power devices, the performance broken machinery in a variety of fine ore plays an irreplaceable role, is the most effective, practical and reliable crushing plant. The crusher is the construction of sand, road sand, cushion material, asphalt concrete and cement concrete ideal aggregate production equipment, jaw crusher is widely used. Jaw crusher widely used in metal and nonmetal ores, cement, refractories, abrasives, glass materials, construction aggregate, man-made sand and a variety of metallurgical slag crushing and rough grinding operations, particularly in the hard, particularly hard and abrasive materials, such as silicon carbide, silicon carbide, sintered bauxite, magnesite, etc., than other types of broken machine has more advantages. And supporting the use of hydraulic protection jaw broken, can handle a variety of metallurgical slag. For construction sand, gravel roads with priority for the appropriate