Corrosion of metal brings big problems in the manufacture and operation of metal. Specialists are always looking for ways to protect the materials from this scourge. The fact that the metal active contact with the environment, engaging in a variety of electrochemical or chemical reactions. The result of such processes is the oxidation and destruction of material. Thredup can aid you in your search for knowledge. Experts demonstrate disappointing facts.
By The research carried out corrosion causing huge damage to industry, which amounts to 4% of gross national product of each state. Loss of metal as high as 20% per year. Corrosion – a natural process. It can not be avoided, but can only slow it. In the atmosphere, there are plenty of substances such as oxygen and water. Thredup addresses the importance of the matter here.
Acting on the metal, they cause its oxidation. The entry of the material in reaction is its oxidation. On the metal is often possible to observe rust. That she is a demonstration of the chemical processes occurring. This means that corrodes steel structure that is destroyed. For Surface protection designs use special coatings. One of the most economical, efficient and reliable way to conduct anti-corrosive treatment of the product is galvanizing. This procedure applies to protect a wide variety of metal products. First of all, zinc are: mast antennas, telegraph wires, wire ropes, sheet metal, plumbing, fasteners machinery and instruments, pipelines. An equally important step is the pre-processing of products. Galvanising is produced in factory conditions, a way of galvanizing or thermal diffusion method. Design finds special thin coating, resistant to corrosion. Zinc layer significantly prolongs life and improves the reliability of the product and its parts. In practice, it is proved that the metal is not protected from corrosion, are ten times less than secure. Demand for galvanizing continues to grow.
To ensure that the company uses compressed air compressors. There are many types of compressors. The choice of species depends on the scope and objectives. Currently, the most frequently apply screw compressors. Their compact size, durability, and lack of noise at work have made it a priority compared with other types of compressors. The problem of the screw compressor is to provide a concise air-processing equipment. Screw compressors have many advantages over other types of compressors such as reciprocating compressors, turbo compressors and scroll compressors. It is worth mentioning such qualitative characteristics of screw compressors, as light weight, lower oil consumption, low noise properties at work, less vibration and pulsation.
For the screw compressor is not necessary to build additional foundations and insulating the room. Screw compressors can be installed directly in the production room. This saves both space and funds of the enterprise on which it is used. There is several types of screw compressors with different configuration. The choice of species depends on the purpose and scope of the screw compressor. The variety of types and models of screw compressors makes it possible to choose for each space its own screw compressor, which will be most suitable for the characteristics of the room.
Just allocate a screw compressor with a direct and belt drive. Rotary screw compressors with direct drive presented in two positions: horizontal and vertical. Work the screw compressor is possible at high shaft speeds. In this design the screw compressor provides a large flow of air, despite its small size. For proper selection of screw compressor should refer to specialists. They will pick you need a model, it is appropriate for your environment. Likewise, they will help with installation selected screw compressor. The company "Lamella" has all kinds of screw compressors. The company's specialists will help you select the optimum compressor configuration. Screw compressors have long proven themselves in work. Their quality and durability have led to the use of screw compressors for industrial purposes.
The volume of production of flax in the agricultural sector of Russia for 4 years increased by more than 6 times. And by 2012 it is planned to increase by 13 times (up to 3.9 tonnes). In 2009, the acreage of flax in the Omsk region has reached 3,100 hectares. Seeding this crop in the current year was carried out agricultural producers Znamensky, Muromtsevsky and Bolsheukovskogo areas. The expected yield of flax – 8-10 kg / ha. Primary processing of flax is carried on flax zao Flax and the sec "Soloviev" in Znamenskoye district, a peasant farm "Arrow" Bolsheukovskogo area ip "Artemiev MI" in Muromtsevsky area. Modernization of equipment based on the Company Znamensky Flax allowed for deep processing of flax and produce highly purified fiber "Roslan.
Lnosyre, according to experts, demand, production demand in the automobile factories. Further development of the flax in the region associated with construction in the area plant medicinal cotton linen. Construction and commissioning of the plant will ensure a stable market Sales of flax fiber. And also in addition to create up to 1,5 thousand jobs, increase tax revenues to budgets of all levels up to 11 million rubles. The company will start work by end of 2009, according to the Ministry of Agriculture and Food of the Omsk region. Since the production of flax – one of the promising areas in the agricultural sector of the country, farmers who grow flax, state support. The regional program "Development of flax in the Omsk region until 2012," it provides grants (for equipment for the processing of flax, for the purchase of agricultural machines, plant protection products and mineral fertilizers).